Now that you finally have a custom canopy tent
with you, it’s time to learn about how to maintain it. Although a skilful
vendor like Signleader Display
produces it, keeping the tent is another task to complete by the owner. For the
extensive care for a custom canopy, we wanted to share the detailed steps to
clean and maintain each tent part. The article comes in two parts; the first
one explains the methods to be used to clean one of the most vital parts of the
tent, the fabric.
Without further ado, let’s start with how to clean the fabric
part of your 10x10
custom tent.
Fabric
Care
1. Washing
The Fabric
In order to clean the custom 10x10 tent’s fabric, prepare
two things: soap and warm water. Combine them both and create some solution. If
bath soap isn’t around, look for another alternative. Detergents for dishes or
clothes can also be used for this purpose.
Now, if the solution is finally made and ready, clean the fabric
thoroughly in one sweeping motion. The detergent or soap will remove the
remaining deposits, continue the step if the stains still persist.
After being cleaned with the solution, prepare a garden hose
with a spray nozzle set to a flat setting. Now spray from top to bottom in
vertical motions until all debris and remaining dirt are gone.
Remember, don’t ever use bleach for customized tents since it can discolor the fabric.
2. Drying
Let’s proceed with the drying method for the custom tent’s fabric. After the washing process is done, stretch the fabric wide on a flat line. Use clothesline, sawhorses, or anything that can be used to hang the fabric.
3. Folding
To retain the natural shape of the tent, fold it following the existing creases. Never just put and bunch up the canopy tent or forcing it into the bags. Sharp or any random fold will result in the reduced lift expectancy of the fabric.
4.
Repairing
Accidents may happen eventually, and what you can do about the
tears and holes is repairing them. Quickly fix them using a seam sealer or
patch kit before it worsens as soon as you notice them.
Frame
Care
1.
Cleaning the frame
Other than the fabric, you can also clean the frame part of the 10x10 canopy tent. Never clean the frame when it’s completely folded. Set it up first with all the legs and parts fully extended, and continue cleaning it with the solution we’ve created before. Each owner will sometimes give a recommendation of how to clean each part of the ten, best to contact them to gain additional information.
2. Keep
the frame like new
Now while cleaning the frame, you may as well check if there are any loose screws that night to be fastened again. Check the corresponding parts and fasten them as soon as you notice.
3.
Additional Options
As a way to protect the 10x10 event tent’s frame, you may
also utilize sprayable silicon, which can be obtained from the nearest stores.
You can also ask for the info from the manufacturers, in case they have
dedicated shops for it.
Comments (0)